Best Steel Targets for 9mm: What to Buy and How to Set Them Up

Shooting Targets USA ·

9mm pistol, magazines and safety glasses on a range bench with steel plates downrange

Quick answer: for 9mm, the best steel targets are 3/8" or 1/4" hardened plate shot from at least 10–15 yards with standard lead or jacketed ammo. Start with a few 8"–10" gongs or a C-Zone torso for basics, then add a reactive target like a Texas Star, plate rack or dueling tree once you want speed and movement. Hang or angle everything so the face points slightly down.

The 9mm is the most popular round we see on pistol bays, and it's a great match for steel. It's affordable to shoot a lot, it's gentle on hardened plate, and almost every target we build in King, North Carolina is rated for it. Here's how to pick the right steel and set it up so it lasts and stays safe.

9mm on steel at a glance

Target type Good for 9mm? Best use Minimum distance
1/4" AR500 gongs Yes Lighter plates that swing and ring more on pistol hits 10–15 yards
3/8" AR500 gongs and torsos Yes Plates you can also use with your rifle later 10–15 yards
Stake-in-the-ground reset targets Yes Nonstop shooting with no walking downrange 10–15 yards
Texas Star and Speed Rack Yes Moving targets, timed drills and transitions 10 yards (per product rating)
Pistol Dueling Tree Yes Head-to-head practice 10–15 yards
Steel-core, "penetrator," tracer or incendiary 9mm Never Keep it off all steel Never

Why 9mm and steel get along so well

Steel damage comes mostly from speed. A fast bullet concentrates a huge amount of pressure on a tiny spot, and that's what dimples and craters a plate. Common 9mm range loads leave the muzzle somewhere around 1,000 to 1,200 feet per second: lighter 115-grain bullets at the fast end, heavier 147-grain bullets at the slow end. That's less than half the speed of a typical rifle round.

At those speeds, a lead or copper-jacketed 9mm bullet flattens and breaks apart against hardened steel instead of digging in. That's why a good plate can take a huge amount of 9mm and keep a smooth face for years, as long as you stay at the right distance.

It's also why pistol steel can be set up so much closer than rifle steel. On our 3/8" steel, the minimum for non-magnum pistol (9mm, .40, .45 ACP) is 10–15 yards. A rifle needs at least 100. For the full chart, see how far away to shoot steel targets.

1/4" or 3/8" steel for 9mm?

Both work. The choice comes down to what else you shoot.

  • 1/4" plate is lighter, so it moves more when you hit it and is easier to carry and hang. It's built for non-magnum handguns and .22 LR only, which makes it a nice fit if your steel will only ever see 9mm-class pistols and .22s.
  • 3/8" plate is heavier and handles pistol plus most centerfire rifle at the proper distance. If you might bring an AR or a deer rifle out to the same property, 3/8" means you only buy your gongs once. Just inspect the plates closely after rifle use before you shoot pistol at 10–15 yards, because rifle pitting is dangerous at handgun distances.
  • Magnum handguns (.357 Mag, .44 Mag) are a different story: use 3/8" steel only and shoot from at least 25 yards.

One thing thickness does not change: the minimum distance. A thicker plate survives better, but fragments still fly the same way. Stay at 10–15 yards either way.

Picking the right size

For 9mm practice at typical pistol distances, size controls difficulty more than anything else.

  • 8"–10" round gongs are a comfortable starting point for most shooters at 10–15 yards. You'll get plenty of hits and plenty of ring.
  • 4"–6" plates are where things get humbling. Use them to test trigger control or to back up a little and stretch your skills.
  • Torso targets train you to put rounds where they matter. The USPSA/IPSC C-Zone torso is 12" x 20", a realistic size for defensive and competition drills.

A mix of sizes is better than three of the same. Big plates build confidence and speed; small plates keep you honest.

Adding movement: reactive targets

Static gongs teach accuracy. Reactive targets teach you to think and shoot at the same time. For 9mm shooters, these are our favorites:

  • Texas Star. Five 8" SR500 plates on a 48" hub. Every plate you knock off changes the balance, so the star spins in ways you can't predict. One person can reset all five plates in about 20 seconds.
  • Dueling Tree. Two shooters race to flip paddles to the other side. The pistol version uses 1/4" SR500 paddles made for non-magnum handguns, which covers 9mm.
  • Speed Rack. Six 8" SR500 plates on a 15-degree angle for strings, transitions and timed drills.
  • Stake-in-the-ground reset targets. Stab them in the ground and keep shooting. Hits spin or flip the plates, so there are no reset walks.

How to set up 9mm steel

  1. Measure your distance. Pace or measure at least 10–15 yards from the firing line to the face of every plate. Don't guess.
  2. Hang or angle the face down. Chains, hangers or angled mounts let the plate tip toward the ground so fragments go into the dirt. Swinging plates also soak up energy.
  3. Use a soft backstop. A dirt berm or hillside behind the target catches misses. Keep rocks, concrete and hard ground out of the impact area.
  4. Spread targets out. Space plates far enough apart that a hit on one doesn't splash the next one, and so you get real transitions.
  5. Paint between strings. A fresh coat of target paint makes every hit easy to see, even at close range.
  6. Gear up. Eye and ear protection for every person on the line, every time. Our safety information page covers the rest.

Common mistakes

  1. Creeping closer. It's tempting to step in for "just one drill." Under 10 yards on steel, switch to paper or cardboard.
  2. Bolting plates flat and rigid. A plate mounted straight up and down with no give sends more energy and fragments back uprange.
  3. Grabbing mystery ammo. Standard lead or jacketed 9mm is fine. Steel-core, armor-piercing, tracer and incendiary rounds will damage the plate, create a ricochet hazard or start a fire.
  4. Shooting a damaged plate. If a face is pitted, cratered, bent or cracked, retire it. A rough face doesn't deflect fragments predictably.
  5. Buying only one size. Three identical gongs get boring fast. Mix big, medium and small.

What to buy

To get started: the Gong Starter Kit gives you 8", 10" and 12" 3/8" AR500 gongs with hangers, so the same plates will work for your rifle later. If you only shoot non-magnum pistol and .22 LR, the 1/4" Gong Set (4", 6", 8" and 10") is a lighter option.

For defensive and competition drills: the 3/8" AR500 USPSA/IPSC Torso Target.

For nonstop plinking: the Centerfire Reset Pack, three stake-in-the-ground pistol targets for nonstop plinking.

For speed and movement: the Texas Star, Dueling Tree, Speed Rack and the auto-resetting Elite Series Popper.

To hang it all: Quick Stands (just add 2x4s), T-Post Hangers and a can of target paint.

Want to know why our reactive targets use a different steel than our gongs? Read AR500 vs SR500 steel targets.

FAQ

How close can I shoot steel with a 9mm?
On our 3/8" steel, no closer than 10–15 yards with standard lead or jacketed ammo. Some interactive targets list 10 yards as their minimum. For anything closer, use paper.

Is 1/4" steel thick enough for 9mm?
Yes. 1/4" steel is made for non-magnum handguns and .22 LR, and 9mm is right in its wheelhouse. Just don't put magnum handgun or centerfire rifle rounds on it.

Can I shoot 9mm FMJ at steel?
Yes. Ordinary lead and copper-jacketed FMJ is exactly what pistol steel is built for. Steel-core, armor-piercing, tracer and incendiary rounds are the ones to avoid.

What size steel target is best for 9mm?
An 8" or 10" gong is a great all-around plate at pistol distances. Add a 4" or 6" plate for precision and a C-Zone torso for drills.

Can my 9mm targets also take my rifle?
If they're 3/8" and rifle-rated, yes, but only from at least 100 yards and with impact velocity under 3,000 fps. Inspect the plates closely after rifle use before shooting pistol up close. Don't use 1/4" steel for centerfire rifle.

Not sure which setup fits your range? Contact us and we'll help you put together the right 9mm steel.

Shop the targets

Related guides