USPSA Target Zones Explained: A, C and D Scoring (and How to Practice)
Shooting Targets USA ·

Quick answer: the USPSA target has three scoring zones. The A-zone is the center box and is worth 5 points. The C-zone around it is worth 4 points for Major power factor or 3 for Minor. The outer D-zone is worth 2 (Major) or 1 (Minor). Older targets also show a B-zone, but USPSA now scores a B hit the same as a C. Your best two hits on each paper target count, a miss or a no-shoot hit costs you 10 points, and scoring steel is worth 5 points if it falls. Your stage score is your points divided by your time, which is called the hit factor.
If you're heading to your first USPSA match, or you want your practice to match how you'll be scored, here's what each zone means and how to train for it.
USPSA scoring at a glance
| What you hit | Major | Minor | Good to know |
|---|---|---|---|
| A-zone | 5 | 5 | Same value for everyone |
| C-zone (and old B-zone) | 4 | 3 | B hits are scored as C |
| D-zone | 2 | 1 | Still beats a miss by a lot |
| Scoring steel (popper or plate) | 5 | 5 | Must fall to score |
| Miss | -10 | -10 | Twice the best hit on that target |
| No-shoot hit | -10 | -10 | Applies to cardboard and steel no-shoots |
What the A, C and D zones are
The standard USPSA cardboard target is about 18 inches wide and 30 inches tall. Perforated lines split it into zones. The A-zone is the small high-value box in the middle. The C-zone wraps around it. The D-zone is everything left at the outer edge.
Shooters often say "Alpha," "Charlie" and "Delta," so a run with all A hits is "all Alphas." You'll still see "B" printed on some older targets. USPSA has been phasing B-zoned targets out, and any B hit is scored the same as a C hit.
If you shoot IPSC matches outside the US, the idea is the same, but those matches run under IPSC's own rulebook. Always check the current rules for your match.
Major vs Minor: why the same hit can score differently
USPSA rewards more powerful loads on the outer zones. Your power factor is your bullet weight in grains times its velocity in feet per second, divided by 1,000. Loads that make 125 or more score Minor. Loads that make 165 or more can score Major in divisions that allow it.
An A hit is 5 points either way. The difference shows up outside the A-zone: a Major C hit is worth 4 and a Minor C hit is worth 3. That's why Minor shooters, including most 9mm shooters, put so much work into getting their hits in the A-zone.
How hits are counted
- Best two hits. Unless the stage briefing says otherwise, each paper target needs at least one round, and your best two hits count.
- Breaking the line. If the bullet's diameter touches the line between two zones, you get the higher value. Officials check using the bullet's size, not just the hole, because a hole can look smaller than the bullet that made it.
- Steel must fall. Scoring steel is worth 5 points, but only if it goes down. A hit that rings a popper without knocking it over doesn't score.
- Penalties. A miss is penalized twice the best hit on that target, so 10 points on cardboard. Hitting a no-shoot also costs 10.
Hit factor: why speed and accuracy both matter
Many USPSA stages are scored Comstock, and it's the only format that allows steel. You can fire as many shots as you want, the clock stops on your last shot, and your score is points minus penalties, divided by time. That's your hit factor.
Here's what that means in practice. One shooter goes slower and shoots all A's. Another goes faster and takes a few C's. Either one can win the stage: whoever earns more points per second comes out ahead. Over time you learn when to slow down for a tight shot and when a fast C is the better trade.
You'll also see two other formats. Virginia Count limits how many rounds you can fire, and it's used only with cardboard. Fixed Time adds a time limit and ranks shooters by points instead of hit factor. Fixed Time has no miss penalties.
How to practice the zones with steel and cardboard
Paper tells you exactly where you hit, which is the only way to see your real zone percentages. Steel gives you instant feedback, so you can shoot faster drills without walking downrange after every string. Good practice uses both.
A simple setup is a full-size torso plus a smaller A-zone size torso. Use the A-zone plate for slower, precise strings. Use the big torso for fast transitions and draws. Then shoot a few strings on cardboard to check your real hit placement.
A harmonic target goes one step further. Ours uses a front plate with A-zone windows cut out. Shots that pass through the windows hit a spring-mounted inner plate and make a loud, high ring. Hits on the outer plate make a dull, low ring. You hear the difference without walking up to check.
On our 3/8" steel, shoot non-magnum pistols (9mm, .40, .45 ACP) from at least 10–15 yards. That's a great distance for zone work. For every caliber, see how far away to shoot steel targets. For timer drills, try our 5 steel target drills to run with a shot timer.
Common mistakes
- Chasing only A's in practice. Points per second wins stages. Practice at match speed and see what your hit factor really is.
- Assuming a ringing popper scored. In a match, steel has to fall. Keep shooting until it's down.
- Treating a miss like a zero. A miss is worth -10, and you also lose the points you didn't earn. A slow make-up shot is almost always worth it.
- Practicing only on steel. Steel ring doesn't tell you if the hit was an A or a D. Check your zones on cardboard regularly.
- Shooting steel too close. Zone drills are tempting at 5 yards. Use cardboard for close work and keep pistols at 10–15 yards or more on steel.
- Not checking the stage briefing. The briefing can change how many hits count. Read it before you shoot.
What to buy
- USPSA/IPSC Torso Target: a 3/8" AR500 steel torso sized to the full 18" x 30" target.
- USPSA/IPSC Torso Kit: an A-zone size (7" x 12") and a C-zone size (12" x 20") 3/8" AR500 torso with two T-post hangers.
- USPSA/IPSC Torso Trio: A, C and D-zone size torsos, 3/8" AR500, with three T-post hangers.
- Torso T-Post Pack: one torso in the size you choose plus a T-post hanger.
- USPSA/IPSC Harmonic Target & Signature Stand: SR500 steel that tells A-zone hits apart from outer hits by sound.
- USPSA/IPSC Cardboard Target: 18" x 30" cardboard targets in packs of 10, 25, 50 or 100.
- IPSC/USPSA 20" x 32" paper practice target: for A/C/D-zone accuracy drills.
- Quick Stands: an easy way to put up cardboard at the range.
Practicing for Steel Challenge too? Read Steel Challenge stages explained. Curious about our steel? See AR500 vs SR500 and our SR500 steel targets page.
FAQ
How many points is an A-zone hit in USPSA?
Five points, for both Major and Minor.
What happened to the B-zone?
USPSA is phasing out B-zoned targets. If you see one, a B hit is scored the same as a C hit.
Is 9mm Major or Minor?
Standard 9mm loads make Minor. Power factor is bullet weight times velocity divided by 1,000, and Minor starts at 125. Some divisions are scored Minor no matter what, so check your division's rules.
What if my hit touches the line?
If the bullet's diameter touches the line between two zones, you get the higher value.
How much does a miss cost?
Ten points on a cardboard target, plus the points you would have earned.
Can I practice USPSA on steel at home?
Yes, where it's legal and safe to shoot. Use steel at 10–15 yards or more for pistols, put up a good backstop, and mix in cardboard so you can see your real zone hits. Read our safety information before you start.
Questions about setting up a USPSA practice bay? Contact us and we'll help you pick the right targets.