Description
Tee Post Gong Mount
The Tee Post Gong Mount is our most budget friendly way to mount Genesis Steel Target Plates on your range. Utilizing a 1.25 Lb/foot Tee post creates a stabile and reliable method for hanging our AR500 Gong target plates. It doesn’t get much simpler or much easier.
Included with Each Tee Post Mount:
With each Tee Post Gong Mount we include the following components:
- (One) Welded Tee Post Assemble with (2) Holes that are tapped 3/8″-16 for thumb screws
- (One) Yellow Zinc Grade 8 carriage bolt
- (One) Custom Compression Spring
- (One) Locking Nut
- (Two) 3/8″ X 1″ Thumb Screws (to tighten to Tee Post)
Tee Posts are readily available at almost every hardware store
Tee Posts are very common in most hardware stores. However, you should ensure you get the correct posts. ONLY the 1.25 LB/foot posts will work. Thicker, heavier posts are available, so be sure you are purchasing the correct ones. Also, Tee posts sometimes have damage from cutting to size. We highly recommend bringing your Tee Post Gong Mount WTIH you to the store. That enables you to test fit the bracket to the posts you plan to buy. It is rare, but sometimes Tee Posts are out of spec. They are not exactly precision posts, so be sure to verify before purchasing.
The Shape and size of the Tee Posts create a stiff system. This bracket is PERFECT for any of our Genesis Steel Target Plates.
What Size Tee Post and How Far Into the Ground Do They Go?
We recommend you purchase 60″ Tee Posts and then drive them into firm soil at least 12″. This is required to keep the post stabile. Loose ground could be difficult to make a sturdy platform. Test your soil, ensure that it will create enough rigidity that the target will be positioned properly and will not fall over.
